Authentic Products  Warranty  Full Refund
Become Lmall Brand Partner
Liqui Moly Motorbike Care 1602/1603/1509/1591

    Liqui Moly Motorbike Care 1602/1603/1509/1591

    (SUPER BUNDLE DEAL) (Official Store)
    RM 175.00 RM 225.50
    22% Off
    Please select option below


    - +
    5 left
    *Quantity exceeds maximum allowed
    Delivery From JOHOR BAHRU / Johor
    Estimated Arrival :5-7 working days.
    Shipping Fee
    RM 13.6 by courier to Peninsular Malaysia
    (Only available for Peninsular Malaysia)
    Ship To : Only Peninsular
    Add to wishlist
    We accept
    and more
    Buyer Protection
    with NetPay
    Full Refund if you don't receive your order*
    Product ID : 207687626 Brand : Liqui Moly Model / SKU : 1602/1603/1509/1591 Conditions : New

    Liqui Moly Motorbike Care 1602/1603/1509/1591

    Motorbike Chain Cleaner


    Specially developed cleaner with selected solvent combinations for fast, easy cleaning and degreasing structural parts in the two-wheel sector.

    Technical data

    Color / appearance: colourless

    Flash point: < 21 °C

    Density: 0,707 g/ml DIN 51757

    Base: solvent-mixture, acetone-free

    Form: liquid, aerosol

    Propellant: CO2

    Areas of application

    For cleaning chains with and without O/X-rings on two-wheeled vehicles and quads.


    Place a box or rag under the parts to be cleaned. Spray dirty chains withMotorbike Chain Cleaner and let it run off. After the solvents have evaporated, the chain will be clean and free of grease and ready to be coated with Motorbike Chain Lube or Chain Spray White. Do not spray onto plastics. Do not lay rubber components in a container with Cleaning Fluid to clean them as they may be attacked. Note Check parts which have been painted for compatibility by testing on a hidden area.

    Motorbike Helmet Interior Cleaner


    Cleans gently and thoroughly. Removes bacteria and provides a pleasant, fresh scent. The protective film prevents dirt from accumulating quickly.

    Technical data

    Density at 20 °C: 0,91 g/ml

    Base: water-alcohol surfactant solution, aromatic principles

    Color / appearance: colourless

    Odor: Zitrone

    pH value: neutral

    Form: aerosol, liquid

    Propellant: propane, butane

    Flash point: -60 °C

    Areas of application

    Gentle and thorough cleaning of helmets, helmet upholstery, visors, trims, saddles, etc.


    Shake vigorously before use. Next, spray onto a soft cloth or rag and rub into the fabric uniformly using slight pressure. Test plastic components on a suitable spot beforehand to make sure that the colors are not affected. Do not use the helmet immediately after cleaning as the product is based on a water/alcohol solution.

    Note: After using the Motorbike Helmet Interior Cleaner, ventilate the helmet thoroughly.

    Motorbike Cleaner


    Motorbike Cleaner is a cleaning fluid which has been specially developed for motorbikes and bicycles and is free of solvents which are harmful to the environment and phosphates.

    Technical data

    Density at 20 °C: approx. 1.075 g/cm³ (agent) g/cm³

    Base: surfactants; watersoluble solvent

    Biodegradable: more than 80 % according to WMG

    Color / appearance: beige

    Odor: parfumed

    pH value: 8,2 (20°C)

    Areas of application

    For cleaning motorbikes, bicycles and scooters etc.


    Spray thinly and evenly on motorbike, bicycle or scooter only when cool. Use a brush on places which are heavily contaminated. Leave Motorbike Cleaner to act for 5-15 minutes depending on contamination and rinse thoroughly with a jet of water. When dry, wipe with a soft cloth. For parts which have been repainted, check paint for compatibility (spotting or lifting) on somewhere out of sight. If used properly however, paint and plastic will not be damaged. When cleaning, the local regulations of the water management authority must be followed.

    Note: Do not use on motorbikes with magnesium rims.

    Motorbike Chain Lube Spray White


    White, full synthetic special grease. For optimal lubrication through visible application on the chain. Cold, heat and spray resistant. Very good adhesion and wear protection. Reduces chain elongation and extends the service life of the chain. Good creeping properties and good corrosion protection. The 50 ml can can be refilled with the 400 ml can. We recommend cleaning the chain with Motorbike Chain Cleaner (Part No. 1602) before use.

    Technical data

    Base: synthetic oil, additives

    Color / appearance: white

    Density: 0,69 g/ml

    Operating temperature range: -30 °C to +180 °C short term 200 °C °C

    Water resistance at 90 °C: 0 DIN 51 807

    Form: aerosol, liquid

    Flash point: -60 °C

    Areas of application

    For all highly-stressed and high-speed motorcycle chains with and without O/X-rings.


    We recommend cleaning the chain with Motorbike Chain Cleaner (Part No. 1602) before use. Spray chain with Motorbike Chain Spray until white. The lubricant attains its final consistency and adherence once the solvent has evaporated.

    Last Updated @ 11/27/2018 11:48:15 AM

    All our products are imported and original. Please buy with confidence.


    Maybank : 5-01011-44960-1

    Skynet Courier

    - 3-5 days for shipping

    - RM 5.00/ parcel

    *All product no warranty

    Average Product Rating

    0.0 stars out of 5
    0 rating(s) 0 review(s)
    5 stars
    4 stars
    3 stars
    2 stars
    1 star
    Share your thoughts with others
    Write a review
    Only buyers who purchased the product may leave a review
    Related Products

    LiquiMoly' Best Seller

    LiquiMoly' Promotion Items

    LiquiMoly' Recently Sold